FPV TwinStar II Project
Here's my updated set up as of 09-04-09:
1 4000mha 3 cell1p Lipo Batt.
2 APC 8x4e Props
2 Castle Creations 25 amp ESC
2 E-Flite Park 480 1040kv BL motors
4 HS-81MG servos
1 HS-81 mod for 180o for Camera
1 2.4 ghz AR7000 RX
1 .9ghz wireless TX (Hobbywireless.com)
1 KX-151 High res camera (Hobbywireless.com)
1 Garmin Geko 201 GPS (no longer needed as off 4-08)
1 Eagle Tree Systems OSD and GPS( added 4-08)
1 3s 1000mAh 3cell Lipo for camera gear
Wieght RTF 54oz
270 Watts Max
19 amps Max
Wiring the ESC directly behind the 480 motors
2 9x6e props later replaceed with 2 E-flites 10x8 props that are for thier P-38. This allows more thrust plus counter rotation in-case one motor quits it will still be fly-able
Removed the foam inside the fuselage to allow more room for FPV gear before gluing
Running the rear wires to the front. CF rod added for wing support.
Detachable landing gear for belly landings or smooth runways
Second camera and TX added that is operated by co-pilot/oberserver.
900 Mhz and 1.3 ghz TX'ers